Pemasangan Automatic Sliding door Solic Di Bandung

Pemasangan Automatic Sliding door Solic Di BandungPintu otomatis Jepang , Automatic Sliding Door Jepang Solic
Automatic Sliding Door adalah motor yang digunakan untuk menggerakkan pintu sliding (kaca/kayu). Motor Sliding Motor dapat digunakan untuk menggerakkan double door ataupun single door. Berat maksimum daun pintu yang dapat digerakkan adalah 150 kg untuk satu daun / 300 kg untuk 2 daun. Paket automatic sliding door ini telah dilengkapi dengan sensor gerak untuk menggerakkan motor secara otomatis bila terdapat obyek yang mendekati pintu. Pintu otomatis ini menggunakan controller untuk melakukan setting otomatis dan juga fitur auto rebound pada saat pintu membentur obyek penghalang.

Power Input : 220 VAC

Max Door Weight : 2 x 150 Kg

Max Door Width : 1.3 m

 

Power ultra-mini brushless dc motor of high performance developed with state of the art technology.

Microcomputer provides speedy and silent operation.

Standard Features

Powerful brushless DC motor

The brushless DC motor of high performance is silent and the door moves quietly when it approaches the fully closed position.

Continuous operation

The motor of high performance developed with in the scope of the latest technology provides speedy and cool operation even after continuous opening and closing.

Press closing

The door is pressed at fully closed position by the special character of the DC motor. The effect of the air-condition is not lost through the gap of the door.

Automatic memory for door stroke

The door braking and stop position are automatically determined and memorized by the microcomputer.

Door opening width adjustment

An adjustment screw is provided on the microcomputer control hox so as adjust the door opening width from full to any desired length. It certaintly contributes to your energy saving plan for air-conditioned building.

Durable aluminium hanger rail

The surface of the rail is specially treated to have durability againt wear and tear.

Easy assembly

All major components are attached in the aluminium mounting base which can be supplied at any length. Consequently the installation is done very easily.

Easy door hanging adjustment

The door hanging can be adjusted without any trouble of difficulty by means of one M8 bolt.

Optional Parts

Battery back-up device

The device is powered by a constantly changed battery. It automatically opens or closes the door in case of power failure. LED (Light-emitting diode) which shows the remains of the battery charge is provided on the device.

Electronic lock – manual release

The electronic lock is available in two types DL – 21L (Locked in case of power failure). The lock can be released temporarily by no voltage continuous signals. An optional manual release can be attached to DL – 2L.

Selector key switch

The program selector switch can be attached to the electronic lock. (OFF: Shut off, EXIT: outgoing traffic only, AUTO: Fully automatic, OPEN: permanently open)

Doorside beam

The transmitter and the receiver of the beam are attached to the vertical jambs facing each other. It is an infrared beam that operates the automatic door when the protected bema is interrupted by a person or an object this door side beam is used subsidiary for active switches.

Active switch

Sensor switches	Proximity switch	Step-mat switch
(A ceiling type is also available	The switch is set into the floor	Various sizes are available
Other actives switches are also available (touch switch, pull switch, pedal switch and other).

Accessories

– Electronic chime, floor guide rail, door bottom guide, floor guide roller, door vinyl seal and other.

Combination of Brushless DC motor SH-22 and microcomputer

Control box HM-22 is available for other types

Standard	Heavy duty	Telescopic sliding
SH-22 AC Type	SH-22 AG Type	AN-22 (compact)
Telescopic sliding	Semi-circular	Flexible vinyl strips
AW-22 (heavy duty)	AR-22	AI-22

Main Equipment

Full opening full closing output signal (continuuous signals)

The door with an electronic lock can be checked from a guardroom.

Latch hold open (input)

The door is fully opened by a signal ON of thr connected switch and remains open until the next signal os turned ON.

Outside door opening adjustment (Input)

The door opening width can be  also adjustment with an optional srew.

Automatic re-opening

The door automatically reverses on the closing cycle when meeting resistance from a person or object.

One touch cycle system

The door is securely opened and closed by any short signal from active switch such as a touch switch.

Breakaway

When on outside breakaway signals is turned ON, the door stops instantly.

Reed switches

The door braking and stop position can be determined at any place you like with an optional reed switches instead of automatic setting.

Monitor Lamp

If the door operation is incorrect, the lamp blinks when the door stops at the fully closed position.

Specifications

SH-22	Single leaf	Bi-Parting
Door weight	Up to 150 kg	Up to 110 kg x 2
Opening / Closing speed	100 ~ 500 mm/sec (adjustable)	100 ~ 500 mm/sec (adjustable)
Slow speed after braking	20 ~ 100 mm/sec (adjustable)	20 ~ 100 mm/sec (adjustable)
Hold time	0 ~ 10 sec (adjustable)	0 ~ 10 sec (adjustable)
Power consumption	150 W (average)	150 W (average)
Door stroke	Up to 10.000 mm	Up to 10.000 mm

SH-15	Single leaf	Bi-Parting
Door weight	Up to 100 kg	Up to 75 kg x 2
Opening / Closing speed	100 ~ 400 mm/sec (variable)	100 ~ 400 mm/sec (variable)
Slow speed after braking	20 ~ 100 mm/sec (variable)	20 ~ 100 mm/sec (variable)
Hold time	0 ~ 10 sec (adjustable)	0 ~ 10 sec (adjustable)
Power consumption	150 W (average)	150 W (average)
Door stroke	Up to 10.000 mm	Up to 10.000 mm